- sprayer pressure
Most of us can relate to feeling pressure on us but what I want to talk about how we can take the pressure off our spray equipment.
We find that a lot of times technicians like to turn up the pressure! We understand why they may do this...it gets the job done a little faster. We at Qspray, however, can’t really recommend doing this. We see professional spray equipment come in for repairs all the time with psi set to 200. The more pressure, the faster o-rings, gaskets and other rubber parts wear out and need repair. The more pressure, the likelihood for product drifting from targeted area. We aren’t spraying bugs off the house, we are creating barriers.
Another problem we often see is over-pressurizing spray equipment. If you give your backpack sprayer enough pumps and it still doesn’t work, pumping it more won’t magically fix the problem. It will likely make it worse or make it a bigger problem to fix.
We recommend that technicians get in the habit of releasing pressure at the end of every stop. We learned that at the end of the day isn’t frequent enough to remember all the time and can show you some great pictures of what happens when it freezes at night and tanks are still pressurized!
To learn more and other tips, check out our other Avoidable Problems videos. And stay tuned for our next video on Preventative Maintenance:
Andrew Greess: Number five is pressure. We see lots of issues with pressure. The first thing I want to tell you is don't over pressurize something. We have a joke in our shop that every time we build a sprayer and we send it out with a customer, we set it 75, 100 psi on a power sprayer because that's all you need.
We're not trying to knock the bugs off the house. We're just trying to create a barrier. Every sprayer that comes back in for service is at 200 psi. The joke is, there must be a pressure fairy that goes to everyone's garage at night and turns up the pressure. Now, what we know is the technicians turn up the pressure because they want to get done faster.
If you run it too fast there's some risks. The higher the pressure you run your pump at, you're going to create some problems. First of all, you're going to reduce the life of all the rubber stuff ‑‑ the gaskets, the O‑rings, and the hose. You're reducing the life because you're running at a higher pressure.
You increase the risk of drift. Because you're using higher pressure, you're going to have smaller droplets. You could have drift on the neighbor's property, or on the dog dish, or the kid's bicycle, who knows what.
Then, also, clearly, if you're away from the sprayer, you're going to have a much bigger chemical spill at higher pressure than you would at lower pressure. There's some clear risks of over pressurizing your power sprayer. We also see it with backpacks and B&Gs.
What happens is a technician is using his or her backpack. They're pumping it up and it doesn't spray, so they keep pumping it. If you know it takes, for example, 10 pumps to get your backpack to pump up and you pump it 10 times, 11 times, and 12 times and it's not spraying, don't keep pumping it. You're going to break it.
We see it all the time where guys will keep pumping it, and pumping it, and pumping it. Instead of having a five dollar repair, they've got a complete rebuild because they broke something, so don't over pressurize it. You know your equipment. If it's not working the way you want it to, call someone. Call your boss and say, "What do I do?" You can prevent a lot of downtime and a lot of cost.
The other thing is we really want you to release the pressure at the end of every stop whether it's your B&G, your backpack, or your power sprayer. We used to say release it at the end of the day, but people would forget and they'd put their equipment away under pressure. Now, think about it. It's 120 degrees outside. On your truck it's probably 140. The pressure is going to get even bigger.
Again, we're reducing the life of hoses, gaskets, O‑rings, but were also keeping guns, filter, and everything else under pressure, reducing the life of everything you got. If it's under pressure at night and there's a freeze, you're going to destroy something, guaranteed. I've got some good photos of that.
We recommend releasing the pressure at the end of every stop. You can either give them a little extra squirt or put it back in the tank if it's a power sprayer. You'll eliminate a lot of problems.
If you missed any of the videos in this series, catch up on them here:
Experience Pays: Top 10 Avoidable Spray Equipment Problems And Ways To Avoid Them https://goo.gl/NRB4qj
Choosing the Right Spray Equipment Engines, Backpacks, Pumps and Trailers https://goo.gl/r7L8zJ
Spray Fittings and Tanks - The Right Small Spray Equipment Components Matter Too https://goo.gl/kCk1qo
Oh The Hose Reel Problems We’ve Seen! https://goo.gl/fHBFhZ
Cut Out Design Flaws and Down Time with Better Spray Equipment Design https://goo.gl/r44m22
Common Sense Missing in Some Backpack Sprayers https://goo.gl/8Vixub
Avoid Problems By Consulting Experts in Their Field https://goo.gl/UuA422
Bad Design = More Work And Money in Repairs https://goo.gl/a2Yt6z
Need Easy Access to Spray Equipment Filters https://goo.gl/8Jm1Hf
Bad Spray Equipment Design Leads to Tank and Pump Troubles https://goo.gl/xCw7ef
Why Filtration is Critical in Weed Control and Pest Control Sprayers https://goo.gl/QdVm4f
For more information on Andrew Greess, visit https://www.qspray.com/
Do not overpressurize. Pressure is good. Without it, most power and manual sprayers won’t work. But too much pressure decreases sprayer life. Here’s an interesting observation. When we build a new gas-powered pest spray rig, we install it, test it and send it out at 75 to 100 psi. When spray rigs come into our [...]