B&G PAS Adjustable Regulator 95127014

B&G 95127014 Adjustable Liquid Regulator for PAS & VersaFoamer 4000

The B&G 95127014 Adjustable Regulator is a replacement liquid regulator for the B&G Portable Aerosol System (PAS) and B&G VersaFoamer 4000. On the PAS, this regulator is installed on the black liquid hose and allows the operator to adjust liquid application rate.

According to the B&G PAS User's Manual, adjusting the liquid regulator helps control application output, from a fine ULV aerosol fog to a heavier mist. The manufacturer's PAS parts breakdown identifies part 95127014 as Item #16 - Regulator, Liquid.

Whether you're repairing a damaged regulator or restoring adjustment capability to your equipment, this replacement component helps maintain the liquid-delivery system without replacing the entire sprayer.

Key Features & Benefits

• Adjustable Liquid Flow: Used to regulate liquid application rate on the B&G PAS.
• Manufacturer Part #95127014: Identified as Item #16 in the official PAS parts breakdown.
• Black Liquid Hose Installation: QSpray identifies this regulator as the replacement component installed on the PAS liquid line.
• Dual Equipment Application: Listed for both the B&G Portable Aerosol System and B&G VersaFoamer 4000.
• Targeted Replacement: Service the liquid regulator without replacing the complete equipment assembly.
• Professional Pest Control Equipment: Replacement component for compatible B&G application systems.

Product Specifications

Compatible B&G Equipment & Related Replacement Parts

The B&G 95127014 regulator is listed for the following equipment:

• B&G Portable Aerosol System (PAS): Replacement adjustable regulator for the black liquid hose.
• B&G VersaFoamer 4000: Also identified by QSpray as a replacement regulator for this foaming system.

Related PAS replacement parts include:

• B&G 16401642 Dual Hose Assembly - 10 ft. - Replacement dual air-and-liquid hose assembly.
• B&G 16401643 Dual Hose Assembly - 15 ft. - Longer dual coiled hose assembly.
• B&G 22071829 Female Quick Disconnect - Related PAS hose connection component.
• B&G PAS Replacement Parts - Browse additional regulators, hoses, fittings, and repair components.

Adjustable vs. Non-Adjustable B&G PAS Regulators

The B&G PAS parts breakdown lists two separate regulator components:

These are different regulator components in the PAS system. Confirm the correct manufacturer part number and installation location before ordering.

When Should You Replace the PAS Adjustable Regulator?

Inspect the regulator when troubleshooting liquid application or performing routine equipment maintenance. Replacement may be appropriate when:

• The regulator is visibly cracked or physically damaged.
• The adjustment mechanism is seized or damaged.
• Liquid leaks have been traced to the regulator.
• Liquid application rate cannot be adjusted correctly and the regulator has been identified as the cause.
• The existing regulator requires replacement during PAS maintenance.

Before ordering, inspect the liquid hose, fittings, filter, and other fluid-delivery components to confirm the regulator is responsible for the problem.

Important Operating Note: The adjustable liquid regulator is different from the air on/off valve at the spray gun. QSpray recommends operating the PAS air valve fully open or fully closed rather than partially open, because improper air-valve adjustment may allow liquid to enter the air line and damage the compressor.

Maintenance Note: Turn off the equipment, disconnect electrical power, and safely release tank pressure before servicing the regulator. Follow the manufacturer's maintenance and operating instructions.

Frequently Asked Questions

Where is the adjustable regulator installed on the PAS?
The regulator is installed on the black liquid hose. The gray hose is the air line.

What does the B&G PAS adjustable regulator control?
It adjusts liquid application rate. According to the B&G PAS User's Manual, adjusting the regulator allows the operator to vary application output from a fine ULV fog to a heavier mist.

Is 95127014 the same as 95127013?
No. Part 95127014 is the adjustable liquid regulator, Item #16. Part 95127013 is the non-adjustable regulator, Item #11.

Does this product include the complete hose assembly?
No. This listing is for the adjustable regulator. The PAS dual hose assemblies are available separately.

Where can I find the B&G PAS regulator parts diagram?
The manufacturer's Portable Aerosol System User's Manual includes the exploded parts diagram and replacement parts list on page 2. The adjustable liquid regulator is identified as Item #16.

Product Manuals & Parts Diagrams

Refer to the manufacturer's B&G Portable Aerosol System User's Manual for operating instructions, liquid regulator adjustment, safety precautions, and replacement part identification.

Download B&G PAS Portable Aerosol System User's Manual & Parts Diagram (PDF)

The manual includes operating and maintenance instructions on page 1 and the PAS exploded parts diagram and replacement parts list on page 2.