B&G Sprayer Parts are Critical

The B&G 1-gallon sprayer is an important tool for pest control professionals.

If well maintained, the B&G Sprayer will provide many years of profitable service.

Your B&G Sprayer is completely rebuildable with genuine B&G Sprayer parts.

Keep B&G parts on hand so your downtime is measured in minutes, not days.

Many parts can be easily changed in the field.

You can find all the B&G Sprayer parts at Qspray.com.  It is a lot easier than searching B&G sprayer parts near me.

Here are a couple of key points.

B&G Tips Cleaning – Follow manufacturer directions for cleaning tips.  This usually includes using a soft bristle brush and mild cleaner.  Wire brushes, pins, pocketknives, etc. will destroy tips.  By destroy tips I mean damager or alter the spray pattern, change (probably increase) flow rates,

 Tip Wear – One study reported that B&G brass tips wear out at about 10% per year.  (Source: “Application of Pesticides in Professional Pest Control” by Cecil Paterson and William Robinson of the B&G Equipment Company and Spraying Systems Company). Every year the tip outputs 10 percent more chemical, which is an involuntary increase of chemical costs. If the pattern wears out, the chemical could be applied where it isn’t intended. Replacing tips is cheaper than using worn tips. A new B&G Tip is about $20, which is cheaper than a 10% increase in your chemical costs.

• Prevent Downtime - Keep the old tip as a backup.  Store in the vehicle in your emergency repair kit.

• Secure your B&G sprayer in the truck.  Lots of B&G sprayers get damaged from rolling around in the back of the vehicle or being crushed by other unsecured equipment.

• It’s a Spray Wand not a Crowbar – Our repair shop sees many B&G sprayer wands and tips that are damaged from opening gates, moving trash & debris, being dragged on the ground and other inappropriate uses.