Skip to main content

Your Product Has Been Added to Cart
View Cart

Actisol Compact Portable Aerosol Unit 12" Wand

SKU: B290300
Was: $1,899.00
Now: $1,725.00
Adding to cart… The item has been added
Rating:
Reviews

Product Description

Actisol Compact Unit with 12" Wand (B290300)

The Actisol Compact Unit B290300 is a professional insecticide aerosol delivery system designed for precise treatment of cracks, crevices, wall voids, ceiling voids, and other difficult-to-reach pest harborage areas. Combining the functions of a fogger, mister, and aerosol applicator in one refillable system, the Actisol delivers a fine insecticide aerosol without relying on disposable aerosol cans or chemical propellants.

A built-in diaphragm compressor combines a controlled flow of insecticide with pressurized air at the wand tip, producing a fine aerosol with 98% of particles in the 2.4–15 micron range. The continuous airflow helps carry the insecticide into concealed treatment areas where conventional liquid sprayers may have difficulty reaching.

Designed for professional pest control applications, this American-made unit includes a 12-inch stainless steel application wand, a 15-foot twin coiled hose, and a refillable insecticide tank. Its controlled delivery system helps technicians apply properly labeled products efficiently while minimizing unnecessary chemical use.

Important: No returns, exchanges, or refunds on Actisol units. Please verify equipment compatibility and application requirements before ordering.

Features & Benefits

Fine Aerosol Delivery: Produces a consistent aerosol with 98% of particles measuring approximately 2.4–15 microns.

Deep Crack & Crevice Treatment: Continuous airflow helps distribute insecticide into wall voids, ceiling voids, and other concealed pest harborage areas.

Refillable Insecticide System: Eliminates the need for disposable aerosol cans when using compatible, properly labeled insecticides.

Controlled Chemical Application: Combines a small amount of insecticide with a high volume of air to deliver treatments efficiently.

12-Inch Stainless Steel Wand: Provides precise application with an integrated crack and crevice tip.

15-Foot Coiled Hose: Provides working flexibility while keeping the main unit positioned nearby.

Serviceable Equipment: Replacement wands, compressor components, filters, and other repair parts are available to help maintain the unit.

Made in the USA: Manufactured by Environmental Delivery Systems for professional pest control use.

Specifications

Product Specifications
Manufacturer Environmental Delivery Systems / Actisol
Model B290300
Product Type Professional Insecticide Aerosol Delivery System
Included Wand 12" Stainless Steel Wand with Crack & Crevice Tip
Tank Capacity 28 oz. (Recommended Fill Approximately 20 oz.)
Normal Operating Pressure 10–12 PSI on Liquid Pressure Gauge
Air Pressure 20 PSI
Liquid Pressure Range 9–20 PSI
Aerosol Particle Size 98% Between 2.4–15 Microns
Compressor Diaphragm Type
Power Requirements 110V AC, 60 Hz
Electrical Draw 2.5 Amps / 275 Watts
Hose 15' Red Twin Coiled Tubing
Dimensions 13.5" L x 6.75" W x 7" H
Weight (Empty) 16 lbs.
Weight (Full) Approximately 17.5 lbs.
Country of Manufacture USA

How the Actisol Compact Unit Works

The Actisol Compact Unit uses a built-in diaphragm compressor to produce a continuous airflow through the twin coiled tubing and application wand. A pressure regulator also uses compressed air to pressurize the insecticide tank, pushing liquid through a separate line to the wand.

When the operator squeezes the wand trigger, the insecticide enters the airflow at the nozzle and is sheared into a fine aerosol. The high-volume air stream carries the insecticide into cracks, crevices, and other treatment areas.

When the trigger is released, the liquid flow stops while the air continues moving through the wand. This airflow can help carry the previously applied aerosol farther into the treatment area when used according to the manufacturer's instructions.

Application Advantage: The Actisol's precise liquid delivery and continuous airflow allow technicians to treat targeted areas without relying on conventional coarse liquid spray patterns or disposable aerosol propellants.

Professional Pest Control Applications

Crack & Crevice Treatments

Apply appropriately labeled insecticides into cracks, crevices, gaps, and other difficult-to-access areas where pests may hide. The 12-inch wand helps technicians direct aerosol treatments precisely.

Wall & Ceiling Voids

The continuous airflow helps carry the aerosol into enclosed spaces and concealed areas when the pesticide label permits this application method.

Targeted Professional Treatments

Designed for professional pest control applications where fine aerosol delivery and accurate treatment placement are needed.

Important: Use only insecticides specifically labeled for the intended aerosol, fogging, or misting application and treatment location. Always follow pesticide label directions, required personal protective equipment, ventilation instructions, and reentry restrictions.

Operating & Maintenance Information

Setting the Operating Pressure

For normal applications, Actisol recommends setting the liquid pressure gauge to approximately 10–12 PSI. Follow the owner's manual when adjusting the regulator for different treatment conditions.

Back-Flushing After Each Use

Actisol identifies back-flushing the wand and hose as one of the most important maintenance procedures. Proper flushing helps remove residual insecticide and prevent blockages in the fluid cap, tubing, and spray tip.

Follow the manufacturer's cleaning instructions after every treatment. The process involves relieving tank pressure and purging residual liquid from the application wand and hose. Refer to the cleaning instructions below for the complete procedure.

Storage & Transportation

Drain and clean the tank when changing insecticides or preparing the unit for storage, following the pesticide label and Actisol instructions. Transport the equipment upright and use the red tip protector to protect the wand tip.

Maintenance Tip: Routine flushing, cleaning, and inspection help prevent residue buildup, inconsistent aerosol delivery, and unnecessary repairs.

Frequently Asked Questions

What insecticides can I use in the Actisol Compact Unit?

Use only insecticides whose EPA-approved labeling permits the intended aerosol, fogging, or misting application. Confirm equipment compatibility and follow all pesticide label instructions.

Do not use Vapona (DDVP) in this unit. Actisol warns that it can damage the wand's internal tubing and interfere with proper aerosol delivery.

What electrical power does the unit require?

The Compact Unit operates from a grounded 110/115V AC outlet. If an extension cord is required, Actisol specifies a heavy-duty, three-prong grounded cord no longer than 50 feet. Follow the manufacturer's electrical safety instructions.

The unit produces air but no aerosol. What should I check?

First verify that the insecticide tank contains liquid, the twin tubing is not kinked, and the operating pressure is properly adjusted to approximately 10–12 PSI.

A clogged spray tip or Actisol 30005 Stainless Fluid Cap can also prevent normal liquid delivery. Inspect these components and follow the troubleshooting procedures in the operating manual. Actisol specifies a 0.046" (#56 drill) exit orifice for tip inspection and service; avoid enlarging or modifying the opening beyond the manufacturer's specification.

Can I use an 18-inch wand instead?

Yes. The Actisol 3000118 Complete 18" Wand is available separately for technicians who need additional reach during compatible applications.

Does QSpray service Actisol equipment?

Yes. QSpray stocks Actisol replacement parts and services Actisol equipment at our Phoenix shop. Call (602) 371-1993 for service assistance or replacement part identification.

Replacement Parts & Accessories

Keep your Actisol Compact Unit operating properly with genuine replacement parts and accessories.

Actisol 3000118 Complete 18" Wand – Longer replacement wand for applications requiring additional reach.

Actisol 30005 Stainless Fluid Cap – Replacement nozzle component for proper aerosol delivery.

Actisol 300133 Compressor Intake Air Filter – Replacement intake filter for the compressor.

Actisol 8010068 Compressor Diaphragm – Replacement diaphragm for compressor maintenance and repair.

Shop All Actisol Replacement Parts

Manuals & Parts Diagrams

Download Actisol Compact Unit Operating Manual (PDF)

Download Actisol Compact Unit Cleaning Instructions (PDF)

Download Actisol Wand & Compact Unit Parts Breakdown (PDF)

Review the operating manual before using or servicing the equipment. Proper maintenance and approved chemical selection are essential for safe, dependable performance.

Ordering Information

No Returns, Exchanges, or Refunds: Actisol Compact Units are not eligible for return, exchange, or refund. Please review the product specifications and confirm that this unit meets your application requirements before placing your order.

Questions Before Ordering? Call QSpray at (602) 371-1993. Our team can help you understand the equipment, identify compatible replacement parts, and discuss service options.

Actisol Compact Unit - 12" Wand

Actisol Compact Portable Aerosol Unit 12" Wand

MODEL: B290300

$1,725.00

Add To Cart