Your Product Has Been Added to Cart
View Cart
A mid-size 12-volt Pumptec plunger pump and motor sub-assembly delivering up to 3 GPM at 150 PSI. It's built with an anodized aluminum body and stainless steel valves, plunger, and fasteners. Comes with a pressure relief valve, pressure gauge, and filter. Some assembly may be required.
| Part Number | Pumptec 80835 (350U-190 pump / M8230 motor) |
| Max Pressure | 150 PSI |
| Open Flow | 3.0 GPM |
| Voltage | 12V DC |
| Motor | 1/4 HP |
| Max Current Draw | 30 amps |
| Body | Anodized aluminum |
| Valves / Plunger / Fasteners | Stainless steel |
| Seals / O-Rings | U-Cup / Viton (FKM) |
| Cam | 0.190 |
| Max Fluid Temperature | 140°F |
| Weight | 37 lbs |
Wiring: At up to 30 amps, use heavy-gauge wire sized for your run length and a properly rated fuse or breaker. See the installation instructions for details.
| Model | Flow | Pressure | Amp Draw |
|---|---|---|---|
| 114T Spray Basic (80326) | 1.53 GPM | 200 PSI | 15 A |
| 350U Sub-Assembly (80835), this pump | 3.0 GPM | 150 PSI | 30 A |
| 308L/M960 (82039) | 4.5 GPM | 175 PSI | 72 A |
Shop all Pumptec pumps and parts.
IMPORTANT: We do not accept returns or exchanges on Pumptec pumps that have been installed. This ensures every pump we ship is brand new and fully covered by the manufacturer's warranty.
Download Pumptec 350U Pump Owner's Manual
Download Pumptec 350U Sub-Assembly Installation Instructions
MODEL: Pumptec 80835
$879.99
Add To Cart