Your Product Has Been Added to Cart
View Cart
A compact 12-volt plunger pump and motor assembly that delivers up to 200 PSI, roughly double the pressure of a typical 12V diaphragm pump. It comes ready to plumb with a pressure relief valve and pressure gauge. The simple single-plunger duplex design mounts directly to the motor, so it fits where larger pump sets can't.
| Model | Pumptec 80326 (114T Spray Basic) |
| Max Pressure | 200 PSI |
| Open Flow | 1.53 GPM |
| Voltage | 12V DC |
| Motor | 1/8 HP permanent magnet DC, continuous duty |
| Max Current Draw | 15 amps |
| Inlet Ports | (1) 1/2" hose barb, (1) 3/8" male NPT |
| Discharge Ports | (2) 1/4" female NPT, (1) 1/4" male NPT, (1) 3/8" hose barb |
| Body / Valves | Nylon / Nylon |
| Plunger | 304 stainless steel |
| Seals / O-Rings | T-Seal / Viton (FKM) |
| Cam | 0.075 |
| Fasteners | Stainless steel |
| Max Fluid Temperature | 140°F |
| Weight | 10 lbs |
Wiring: At up to 15 amps, use appropriately sized wire and a fuse or breaker for your run length. See the owner's manual for details.
Need more flow and less pressure? Our 12V Shurflo diaphragm pumps deliver 1.8 to 5.3 GPM at 45 to 107 PSI. Shop all Pumptec pumps and parts.
IMPORTANT: We do not accept returns or exchanges on Pumptec pumps that have been installed. This ensures every pump we ship is brand new and fully covered by the manufacturer's warranty.
Download Pumptec Spray Basic Owner's Manual
Download Pumptec Spray Basic Maintenance Sheet
Download Pumptec Spray Basic Plumbing Guide
View Pumptec 114T Pump Parts Breakdown
Download Pumptec 114T Owner Instructions & Parts Manual
MODEL: Pumptec 80326
$341.99
Add To Cart
