Your Product Has Been Added to Cart
View Cart

QSpray.com Blog — Power Sprayer Parts and News

QSpray.com Information on Pest and Weed Control Sprayers

Your Resource For Sprayer Equipment And Best Practices

LEARN MORE HERE

Recent Posts

Actisol vs. B&G portable sprayer

Posted by Andrew Greess on Apr 3, 2026

Key Takeaways: The Actisol compact Unit is built for heavy, all-day use – it’s tough, proven, and more “bulletproof” for high-volume techs who need reliability day-after-day, job-after-job. The B&G Portable Aerosol Sprayer costs about half as much and fits lighter-duty work, especially if you’re not spraying or […]

Power Sprayer Tank Agitation: Jet vs. Mechanical, Sizing & Setup

Posted by Andrew Greess on Mar 30, 2026

Key Takeaways: Poor agitation causes uneven application rates, tank buildup, clogged filters, and damaged pumps. Jet agitation costs less and handles most spray jobs. Mechanical agitation adds roughly $500 to $1,000 but is best for heavy granular or non-soluble materials. Most liquid products need agitation flow equal to 8% of tank volume per minu […]
Power Sprayer Maintenance - Ignore at Your Peril

Power Sprayer Maintenance - Ignore at Your Peril

Posted by Andrew Greess on Jan 19, 2026

Power Spray Rig Maintenance This is a quick start guide to pest control power spray rig and landscape/weed spray rig maintenance.  For best results read the owner’s manual for each component on your sprayer.  If there is any conflict between the manufacturer’s owner’s manual and the information below, defer to the manufa […]

What Size Spray Hose Do I Need? 1/4", 3/8" or 1/2" for Pest & Weed Sprayers

Posted by Andrew Greess on Jan 13, 2026

Short answer: use the smallest spray hose, measured by inside diameter (ID), that delivers the flow your job needs. For most pest control and post-emergent weed work, that's 3/8". For high-volume jobs like termite pretreats and large pre-emergent applications, step up to 1/2". Spray Hose Size Quick Guide Hose ID Best For Pros Cons 1/4" Low […]
Watch the Pressure! Don't Over Pressurize Your Sprayers

Watch the Pressure! Don't Over Pressurize Your Sprayers

Posted by Andrew Greess on Jan 7, 2026

Most of us can relate to feeling the pressure, but what I want to talk about is how we can take the pressure off our spray equipment. We find that a lot of times technicians like to turn up the pump sprayer pressure a bit too high! We understand why they may do this...it gets the job done a little faster. We at QSpray.com, however, can’t rea […]
How to Use a Backpack Sprayer

How to Use a Backpack Sprayer

Posted by Andrew Greess on Jan 2, 2026

Key Takeaways: Gearing up in proper PPE and mixing chemicals per label before slowly filling the tank keeps spills at bay and you safe. Pump that handle every five seconds for steady pressure; pull the trigger smooth to cover spots evenly with no skips. Rinse your tank with clean water after jobs, check filters often, and lubricate parts. Thi […]

Prevent power spray equipment from freezing

Posted by Andrew Greess on Dec 26, 2025

Power spray equipment freeze damage is expensive in repair expense, downtime & missed appointments. That’s why winterizing sprayers matters. With winter comes additional risk for PMPs and the need for cold weather safety methods. Deep freeze conditions can cause considerable damage to power sprayers. Some of the most expensive power spray […]
Meet the Buzz Duster, the World's Best Long Reach Duster

Meet the Buzz Duster, the World's Best Long Reach Duster

Posted by Andrew Greess on Dec 18, 2025

Key Takeaways: The Buzz Duster lets you apply dust and aerosols at heights up to 20 feet from the ground; no ladder setup, no climbing, no repositioning between spots. Faster stops mean more jobs per day. Cutting the ladder out of your workflow saves real time on every service call, especially second-story work. The kit ships complete: extension p […]
How to Clean and Maintain a B&G Sprayer: 6-Point Maintenance Guide

How to Clean and Maintain a B&G Sprayer: 6-Point Maintenance Guide

Posted by Wm H Robinson on Dec 13, 2025

The B&G sprayer is the workhorse of professional pest control. Most service technicians use their sprayer daily for routine pest control service or for special jobs that require precise application. The tip shut-off valve ensures customer safety, and the rugged stainless steel and brass construction ensures long service. However, the B&G sp […]
How to Buy the Right Bee Suit

How to Buy the Right Bee Suit

Posted by Andrew Greess on Sep 30, 2025

BLACK FRIDAY SPECIAL - REDUCED PRICES ON ALL BEE SUITS & BEE JACKETS! Here are some thoughts on selecting a top quality, well-fitting bee suit.   Color.  Beekeeping suits should be white or yellow.  Dark colors attract and enrage bees.  This is Fit.  Beekeeper suits should be loose to be worn o […]

Stay Informed With Leading Authorities in the Industry

The professionals at QSpray.com specialize in pest control, landscaping, and termite control equipment. We stock the best sprayers and sprayer parts in the industry, and we design our own custom sprayers to provide optimal performance. When you're looking to purchase or repair a sprayer, or if you're looking to stock replacement parts, we have the right equipment for the job. Stocking quality sprayers and parts will prevent downtime, helping you maintain high customer satisfaction and build your business's reputation for reliability. Cut costs and build your business with our articles on spray equipment and best practices. Read the QSpray.com blog for industry insights that will save you time and money.