B&G Quick Disconnect 22071825

B&G Extenda-Ban Quick Connect Kit (22071825)

The genuine B&G quick connect kit for Extenda-Ban valves on B&G hand sprayers. A female quick connect goes on the hose and a male quick connect goes on the valve, so you can snap valves on and off in seconds. That lets you swap between valves and tips in the field without tools. In cold weather, you can remove the valve, drain it and store it somewhere warm so it doesn't freeze and crack.

Specifications

Installation

1. Remove the hose from the valve using an adjustable or suitable wrench.
2. Remove the old Teflon tape from the hose fitting and apply new Teflon tape.
3. Install the female quick connect fitting on the hose and tighten with a wrench.
4. Install the male quick connect fitting on the valve and tighten with a wrench.

How to Use It

To connect: Slide back the collar on the female fitting on the hose, insert the valve's male fitting, and slide the collar forward so it locks.
To disconnect: Slide back the collar and pull the valve out.

Frequently Asked Questions

How do I drain the valve for winter?
Disconnect the valve from the hose, tilt it so the extension is higher than the male quick connect fitting, then squeeze the trigger and let the liquid drain out through the fitting. Store the valve somewhere warm.

How do I maintain the quick connect?
B&G recommends lubricating the internal spring and ball with silicone spray. No grease is needed.

Why are there two part numbers?
B&G is now part of Pelsis, which assigned new order numbers. The legacy number 22071825 and the current order number 1108004832 are the same kit.

Related B&G Parts

• B&G D-50 Sprayer Hose, 48"
• B&G GD-124 Sprayer Repair Kit
• B&G SP-159 Soft Seat Gasket
• All B&G Sprayer Parts

Downloads

Download B&G Extenda-Ban Quick Connect Kit User Manual

Download B&G Sprayer Parts Breakdown & Owner's Manual