Pumptec 10097 Kit C Cam for 212T Pump
Pumptec 10097 Kit C Cam for 212T Pump
Product Description
Pumptec 10097 Kit C Cam & Bearing – 212/213 Pump
The Pumptec 10097 Kit C Cam & Bearing is a replacement drive component for compatible Pumptec 212 and 213 series plunger pumps. The cam converts the motor's rotary motion into the reciprocating movement needed to operate the pump's plunger, while the bearing supports smooth movement within the drive assembly.
This kit features a 0.170-inch cam eccentricity, 3/8-inch thread, and 0.527-inch thickness. It is intended for servicing the pump's cam and bearing assembly when inspection reveals wear or damage.
Product Specifications
| Manufacturer | Pumptec |
| Part Number | 10097 |
| Kit Type | Kit C – Cam & Bearing |
| Cam Eccentricity | 0.170" |
| Thread Size | 3/8" |
| Cam Thickness | 0.527" |
| Compatibility | Compatible Pumptec 212/213VL Pump Configurations |
Maintenance & Replacement
Pumptec identifies the cam and bearing assembly as a component that should be inspected during routine pump maintenance. Inspect for wear, damage, or irregular movement and replace components as necessary.
Because Pumptec offers different cam configurations, verify the existing cam dimensions and pump model before ordering. Using the correct cam is important for maintaining the intended plunger stroke and pump performance.
Service Note: Disconnect the pump from its power source and relieve system pressure before performing maintenance. Follow the manufacturer's service instructions and lubrication recommendations during reassembly.
Owner's & Service Manual
The Pumptec 112T/212T manual includes pump operating instructions, maintenance recommendations, troubleshooting information, and exploded parts diagrams to assist with servicing.

Pumptec 10097 Kit C Cam for 212T Pump
MODEL: Pumptec 10097
$35.99
Add To Cart