B&G Versagun Repair Kit 22067554

B&G Versagun Valve Rebuild Kit (22067554)

The genuine B&G rebuild kit for the Versagun termite valve. When your Versagun starts dripping at the trigger, leaking around the packing, or won't shut off cleanly, this kit replaces the wear parts that seal and shut off the valve, so you can rebuild it instead of buying a new one. B&G lists this kit for both the current Versagun valve (2011 and later) and the earlier Versagun design.

Specifications

Frequently Asked Questions

How do I know my Versagun needs rebuilding?
Common signs are dripping from the tip after you release the trigger, leaks around the packing at the top of the valve, or a trigger that sticks or won't fully shut off. Worn seals are the usual cause.

Is it hard to rebuild?
No. It's a bench job with basic hand tools. The parts diagrams below show where each part goes in both the current and older Versagun valves. Call us at 602-371-1993 if you need help.

Should I check anything else while it's apart?
Check the rod adapter gasket and your hose connection, which are other common leak points. A worn 1/8" rod adapter can leak even with a freshly rebuilt valve.

Related Products

• B&G 22067797 1/8" Termite Rod Adapter
• B&G 22071427 Stainless Termite Rod, 7/16" x 12"
• B&G 22071429 Stainless Termite Rod, 5/8" x 40"
• All B&G Versagun 430 Parts

Downloads

Download B&G Versagun Parts Diagrams (Current & Older Models)