Skip to main content

Your Product Has Been Added to Cart
View Cart

Actisol 8010042 Pressure Gauge

SKU: 8010042
Was: $39.00
Now: $35.99
Adding to cart… The item has been added
Rating:
Reviews

Product Description

Actisol 8010042 0–30 PSI Panel Mount Pressure Gauge

The genuine Actisol 8010042 Pressure Gauge is a replacement 0–30 PSI panel-mounted gauge for the Actisol Compact Unit. Installed on the unit's cabinet panel, this gauge displays the pressure controlled by the regulator, allowing operators to monitor and adjust operating pressure for proper aerosol application.

Maintaining the correct operating pressure is important for consistent aerosol delivery and efficient insecticide application. A damaged, inaccurate, or malfunctioning gauge can make it difficult to properly adjust the equipment and identify pressure-related problems.

Replace the gauge if the needle sticks, fails to return to zero when pressure is released, displays inconsistent readings, or has a cracked or damaged lens.

Specifications

Product Specifications
Manufacturer Actisol
Part Number 8010042
Product Type Panel Mount Pressure Gauge
Pressure Range 0–30 PSI
Mounting Style Panel Mount, Back Connection
Compatible Equipment Actisol Compact Unit
Installation Location Compact Unit Cabinet Panel
Parts Diagram Reference Item #47

When to Replace Your Pressure Gauge

A properly functioning pressure gauge is essential for monitoring the Actisol Compact Unit's operating pressure. Common signs that replacement may be necessary include:

• The gauge needle sticks or does not move when pressure changes

• The needle fails to return to zero after pressure is released

• Pressure readings fluctuate unexpectedly or appear inaccurate

• The gauge lens is cracked, broken, or difficult to read

• The gauge is physically damaged or leaking at its connection

Maintenance Tip: If the equipment is operating abnormally, inspect the regulator, tubing, and other pressure-related components before assuming the gauge is defective. Comparing readings with a known-good gauge can help identify an inaccurate instrument.

Setting the Correct Operating Pressure

According to the Actisol Compact Unit operating manual, the pressure gauge is used to monitor and adjust operating pressure for different treatment conditions.

Normal Operating Pressure

For normal applications, Actisol specifies an operating pressure of approximately 10–12 PSI. Pull upward on the regulator knob to unlock it, then slowly turn it clockwise while monitoring the gauge until the desired pressure is reached.

Overhead Applications

For applications approximately 6–8 feet above ground level or higher, Actisol's instructions describe increasing pressure gradually in 1–2 PSI increments until aerosol delivery reaches the treatment area. Follow the operating manual and pesticide label when making adjustments.

Returning to Normal Pressure

After completing overhead applications, turn the regulator counterclockwise and use the Actisol 300063 Pressure Relief Valve according to the manufacturer's instructions to reduce pressure until the gauge returns to the normal 10–12 PSI range.

Important: Always follow the Actisol operating manual and the pesticide manufacturer's label. Pressure adjustments can affect aerosol delivery and product application rates.

Frequently Asked Questions

The unit runs but produces no aerosol. Could the gauge be the problem?

The pressure gauge can help identify the problem. With the compressor running, the gauge should normally indicate approximately 10–12 PSI when properly adjusted. If pressure is correct but no aerosol is produced, inspect the tubing for kinks and check the spray tip and fluid cap for blockages.

If the gauge appears inaccurate or does not respond to pressure changes, it may need replacement.

Can I replace the pressure gauge myself?

The gauge is mounted in the Actisol Compact Unit cabinet. Before servicing the equipment, disconnect electrical power and safely release all system pressure. Follow the manufacturer's instructions for accessing and replacing the gauge.

Prefer professional service? QSpray services Actisol equipment at our Phoenix shop. Call (602) 371-1993 for assistance.

Will this gauge fit other Actisol models?

The Actisol 8010042 gauge is listed for the Actisol Compact Unit. If you have a different Actisol model, verify the manufacturer's part number before ordering or contact QSpray for assistance.

Manuals & Parts Diagrams

Download Actisol Compact Unit Operating Manual (PDF)

Download Actisol Wand & Compact Unit Parts Breakdown (PDF)

Refer to the manufacturer's parts breakdown to locate the pressure gauge (Item #47) and identify additional service components.

Actisol 8010042 Pressure Gauge

Actisol 8010042 Pressure Gauge

MODEL: 8010042

$35.99

Add To Cart