Exactly what I needed to fix my pump
While the shipping was outrageous, it was the exact part I needed, and they got it out to me fast.
Your Product Has Been Added to Cart
View Cart
The Shurflo 94-379-00 Upper Housing is a replacement pump head housing for compatible Shurflo 8000 Series diaphragm pumps. It features 3/8-inch female pipe thread (FPT) connections and is used to replace an original upper housing that has become cracked, damaged, or otherwise unserviceable.
The upper housing forms part of the pump head assembly and provides the threaded connections for the pump's inlet and outlet plumbing. Replacing a damaged housing can help restore a secure, leak-resistant connection without replacing the entire pump.
IMPORTANT: This is the female-threaded housing. Confirm that your existing pump uses female pipe thread ports before ordering. The male-threaded upper housing is a different part.
The upper housing may require replacement when physical damage prevents the pump head or threaded connections from sealing correctly.
Troubleshooting Tip: If your pump has low pressure, reduced flow, or difficulty priming, inspect the valves, diaphragm, suction plumbing, and other components before replacing the housing. Those symptoms do not necessarily indicate a damaged upper housing.
The Shurflo 94-379-00 upper housing is listed for use with the following pump models:
Compatibility Note: This housing is specifically listed as a replacement for the Shurflo 8000-543-238 pump. Compatibility with other models should be confirmed using the pump's full model number and port configuration. Some Shurflo 8000 pumps use different upper housing designs.
| Manufacturer | Shurflo |
| Part Number | 94-379-00 |
| Product Type | Replacement Upper Pump Housing |
| Port Configuration | 3/8" Female Pipe Thread (FPT) |
| Material | Polypropylene |
| Pump Series | Compatible Shurflo 8000 Series Pumps |
| Replacement Application | Shurflo 8000-543-238 and Other Listed Models |
Before servicing the pump, disconnect electrical power, shut off the liquid supply, and relieve all system pressure. Remove the existing housing according to the manufacturer's service instructions, taking care not to damage the adjoining pump head components.
Inspect the valves, diaphragm, sealing surfaces, and connecting fittings before installing the replacement housing. Avoid overtightening threaded fittings, which can damage plastic pump ports.
After reassembly, prime the pump as directed and inspect the housing and plumbing connections for leaks.
For additional information about pump maintenance, troubleshooting, and replacement components, refer to the Shurflo 8000 Series owner's manual.
While the shipping was outrageous, it was the exact part I needed, and they got it out to me fast.

MODEL: 94-379-00
$24.99
Add To Cart