Coxreels 131-3 Rubber Hose Reel Ball Stop – 3/8" Hose

Coxreels 131-3 Rubber Hose Reel Ball Stop – 3/8" Hose

The Coxreels 131-3 Ball Stop is a durable rubber hose stop designed to prevent hose over-retraction on compatible hose reels. Also known as a hose reel bumper or hose stopper, this adjustable accessory helps keep the end of your spray hose accessible instead of allowing it to retract through the reel's hose guide.

Designed for hose with a 3/8-inch inside diameter (ID) and 21/32-inch outside diameter (OD), the Coxreels 131-3 provides a convenient way to set the desired length of hose extending beyond the reel.

Key Features & Benefits

• Prevents Over-Retraction: Stops the hose from retracting too far through the hose reel guide.
• Adjustable Hose Length: Allows operators to position the stop along the hose to maintain a convenient length of exposed hose.
• Solid Rubber Construction: Durable rubber body designed for hose reel applications.
• Two-Screw Adjustment: Secures around the hose using two opposing screws.
• 3/8" Hose Compatibility: Designed for hose with a 3/8" ID and 21/32" OD.
• Replacement Reel Accessory: Suitable for replacing a worn, damaged, or missing ball stop on compatible hose reels.

Product Specifications

Hose Compatibility & Fitment

The Coxreels 131-3 is specified for 3/8" ID hose with a nominal outside diameter of 21/32".

Important: A 3/8" hose designation refers to the hose's inside diameter, not necessarily its outside diameter. Hose wall thickness varies by manufacturer and construction, so two hoses with the same inside diameter may have different outside diameters.

Before ordering, measure your hose's outside diameter and verify that the ball stop is appropriate for your reel and hose configuration.

How to Install the Coxreels 131-3 Ball Stop

1. Position the Hose: Pull out enough hose to establish the desired exposed length beyond the reel guide.
2. Open the Ball Stop: Loosen the two opposing screws to position the rubber stop around the hose.
3. Set the Location: Place the stop where you want the hose to stop retracting.
4. Secure the Stop: Tighten the opposing screws evenly until the stop is held securely in position.
5. Test the Retraction: Slowly retract the hose and verify that the ball stop contacts the hose guide properly.

Installation Caution: Do not overtighten the screws. Coxreels warns that excessive tightening can pull the screws through the rubber material.

Common Applications

The Coxreels 131-3 is a useful replacement accessory for compatible hose reels used with:

• Professional pest control spray equipment
• Lawn care and landscape spraying systems
• Industrial and commercial hose reel systems
• Air and water hose reel applications
• Other compatible reels using the specified hose dimensions

Other Coxreels Hose Stop Sizes

Coxreels offers several hose stop sizes to accommodate different hose diameters. Common alternatives include:

Other hose stop sizes are sold separately. Confirm hose outside diameter and reel compatibility before selecting a replacement.

Manufacturer Specifications

For additional information about hose stop dimensions, sizing, and installation, see the manufacturer's official accessory specifications:

View Coxreels Hose Stop Specifications

What's Included: One Coxreels 131-3 rubber hose reel ball stop with fastening hardware.