Coxreels 131-4 Rubber Hose Reel Ball Stop – 1/2" Hose

Coxreels 131-4 Rubber Hose Reel Ball Stop – 1/2" Hose

The Coxreels 131-4 Ball Stop is a durable rubber hose reel accessory designed to prevent hose over-retraction and keep the hose end conveniently accessible. Also known as a hose stop, hose bumper, or hose reel stopper, this adjustable component helps prevent the hose from retracting too far through the reel's hose guide.

Designed for hose with a 1/2-inch inside diameter (ID) and 3/4-inch outside diameter (OD), the Coxreels 131-4 allows operators to set the desired length of hose extending beyond the reel. Its solid rubber construction and adjustable two-screw design make it a practical replacement accessory for compatible hose reel systems.

Key Features & Benefits

• Prevents Over-Retraction: Helps prevent the hose end from retracting through the hose reel guide.
• Adjustable Hose Position: Allows the stop to be positioned along the hose to maintain the desired exposed hose length.
• Solid Rubber Construction: Durable rubber body designed for regular hose reel use.
• Two-Screw Adjustment: Secures around the hose using two opposing fastening screws.
• 1/2" Hose Compatibility: Designed for hose with a 1/2" inside diameter and 3/4" outside diameter.
• Compact Design: Features a 2-1/2" overall diameter.
• Replacement Hose Reel Accessory: Ideal for replacing a worn, damaged, or missing hose stop on compatible reels.

Product Specifications

Hose Compatibility & Fitment

The Coxreels 131-4 is designed for hose with a nominal 1/2" ID and 3/4" OD.

Important: Not all 1/2-inch hoses have the same outside diameter. The 1/2-inch measurement typically refers to the inside diameter, while the outside diameter depends on hose wall thickness and construction.

Before ordering, measure your hose's outside diameter and verify that it is compatible with the specified 3/4-inch hose opening.

Also confirm that the 2-1/2-inch overall stop diameter is appropriate for your reel's hose guide.

How to Install the Coxreels 131-4 Ball Stop

1. Extend the Hose: Pull out enough hose to establish the desired exposed length beyond the reel guide.
2. Loosen the Screws: Use a screwdriver to loosen the two opposing fastening screws.
3. Position the Ball Stop: Place the stop around the hose at the desired location.
4. Secure the Stop: Tighten the screws evenly until the stop is held securely around the hose.
5. Test the Retraction: Slowly retract the hose and confirm that the ball stop contacts the reel guide correctly.

Installation Caution: Do not overtighten the fastening screws. Coxreels warns that excessive tightening may pull the screws through the rubber material.

Common Applications

The Coxreels 131-4 is suitable for compatible hose reel systems used in a variety of professional applications, including:

• Pest control spray equipment
• Lawn care and landscape spraying systems
• Commercial and industrial hose reels
• Air and water hose reel applications
• General hose reel maintenance and replacement

Compatibility depends on the hose dimensions and reel configuration rather than the application alone.

Other Coxreels Hose Stop Sizes

Coxreels manufactures several hose stop sizes for different hose dimensions. Use the following comparison to help identify the correct replacement.

Other hose stop sizes are sold separately. Confirm hose dimensions and reel compatibility before ordering.

Manufacturer Specifications

For additional sizing information, specifications, and installation guidance, refer to the official Coxreels hose stop product information.

View Coxreels Hose Stop Specifications

What's Included: One Coxreels 131-4 rubber hose reel ball stop with fastening hardware.