1. Why are companies and institutions choosing to control the surge in their tanks?
To provide the maximum degree of operational safety for their liquid loads, in order to protect employees, easing their physical and mental stress; to prolong the life of equipment and to enhance the safety of the motoring public.
2. Why do Surge Busters® work so well?
With unlimited directions of deflection, this tie-down system eliminates up to 96% of surge in all directions, front to back - side to side - all angles and throughout the entire compartment. Traditional baffles only reduce surge front to back and do not reduce surge within each compartment. Click for technical information.
3. Can this tie-down system be used with potable water?
Yes, they are made of virgin HD polypropylene and approved by the F.D.A for food grade use (potable water). Surge Busters can also be used with most types of hazmat loads (gasoline, diesel, and most types of chemicals). There are one or two caustic acids that are not recommended. For specific information please contact us.
4. Will the Surge Buster® work in all types and shapes of tanks?
Yes, this tie-down system can be installed in all sizes and shapes of tanks – round, elliptical, square and even triangular. The only constraint is the lid size - will the SurgeBuster fit through the tank opening?
5. Who uses the Surge Buster® system?
Fuel and chemical haulers, DOT's, Road Districts, Irrigation Districts, City/County Park Dept's, potable water haulers, agriculture and farm use, etc. They are used for pesticide and herbicide spraying, magnesium chloride spraying for icy roads and any transportation of liquids.
6. When are these Surge Busters® the most beneficial?
During braking, accelerating and when taking evasive action is necessary. When reduced stress on the truck, frame and tank mounts is desired. When keeping blended products in suspension is important.
7. Do these Surge Busters® cause any stress to the tank?
No, this system is not attached to the tank, will not cause any physical damage. Due to the design that eliminates any permanent contact points there is no entrapment of materials and cleaning is simple. A standard water bath while Surge Busters are still in the tank is sufficient.
8. Do Surge Busters® take up room in the tank?
SurgeBusters displace only .8% of tank volume, or approximately 8 gallons per 1000 gallons. Weight is approximately 70 pounds per 1000 gallons.
9. How many SurgeBusters are required for my tank?
For exact calculations click on SurgeBusters - Tank Calculations.
10. What is the SurgeBuster warranty?
The expected life of a Surge Buster System is 15 years. Any product failure due to manufacturing defect will be replaced without charge.
MORE: Surge Busters are approved by the U. S. Forest Service and are required in Fire Suppression Units. They are NFPA Compliant (National Fire Protection Association).